Floor grinding and epoxy coating application services

Need a floor painter for the job? Regis Coatings can offer you a free quotation for the complete floor coatings package. Over the years, Regis Coatings application teams have completed thousands of square metres of Epotread coating application to floors of automotive workshops, aircraft hangars, factories, garages, beverage facilities, etc.   

Regis Coatings also offer concrete floor repair services in most areas of New Zealand. Speak to our helpful staff today to discuss your requirements. 

We have contractors covering most areas of New Zealand, offering concrete floor preparation, concrete resurfacing, epoxy floor repairs and Epotread epoxy resin coating application services. We welcome your enquiry. Contact us to discuss or click the box below to request more information.  

Project focus: Blackwells workshop renovation 2016


Before & after.

Transformed from an old glass factory floor, to the modern Blackwell Motors vehicle service workshop in Christchurch. Regis Coatings team carried out the floor grinding, concrete repairs and applied 3 coats of Epotread 1000. Firstly the whole concrete floor surface was diamond ground to reveal any cracks and craters, these were then repaired with Cretex TR epoxy mortar and Cretex SL epoxy resin. Any areas of slumped or eroded concrete were built up with Epotread SL250 epoxy screed, then a final diamond grind of the floor surface and 3 heavy coats of Epotread 1000 applied by roller.   

Project focus: New Rocket Lab factory, Auckland


Rocket Lab specify the Epotread 1000 epoxy coating for their new 5000sqm factory floor in Auckland. The Regis Coatings team diamond grind the surface and apply 3 coats of EPOTREAD 1000 GREY, followed by 2 coats of Red Epotread specially tinted to match Rocket Lab's corporate colour scheme.      

Project focus: Foot Science factory floor refurbishment


Epotread 1000 in the colour 'VP Blue' is applied in 3 heavy coats at the Foot Science factory. The existing floor surface was prepared by diamond grinding, all floor joints and cracks were chased out and filled with the Cretex compounds from Regis Coatings, then 3 coats of Epotread 1000 applied by roller. As the Epotread 1000 is solvent-free and has very little smell, there was virtually no chemical odour disruption to the staff working in the factory throughout the process. The bright VP Blue colour has attracted numerous positive comments from visitors to their premises. 


For further information call us on 0800 542 542

Contact Us Now


Diamond grinding

The ultimate method of concrete floor preparation, particularly where existing paints are flaking or the surface is oil contaminated.

Regis Coatings offer a professional diamond grinding service nationwide.


  • Levels uneven concrete panel edges
  • Removes oils, paints and glues
  • Provides a superior substrate for coating
  • Dust free when proper equipment used

Shot blasting

Badly eroded concrete floors can typically be prepared by captive shot blasting, followed by a screed of Epotread SL250 epoxy. Then once the Epotread SL250 has cured (about 3-5 days) diamond grind the complete surface and apply 3 coats of Epotread 1000. Call us for further advice.

In situations where a Rapid-Cure epoxy is required, we recommend using the Cretex SL epoxy resin, instead of Epotread SL250.

Advantages of Shot blasting:

  • Cleans out widespread small craters and hollows
  • Ensures superior adhesion by removing any loose material
  • Economical